$5.25$25.25

Bottle Screw Turnbuckle Jaw & Jaw Stainless Steel

Clear
  • Description
  • Additional information

Description

Bottle Screw Turnbuckle


These Bottle Screw Turnbuckles are made from high quality marine grade stainless steel and are designed to attach to a wide range of fixtures and fittings. Turnbuckles are specifically suited to tensioning Shade Sails, Balustrading, Wire Rope or other systems where stainless wire requires tension. Bottle Screw Turnbuckles are commonly used for ballustrading and shade sail installation due to their neat look.

FEATURES:

  • Stainless Steel
  • Threaded Jaw at both ends
  • Forged Stainless Pins
  • Provides a sleek polished look
  • Commonly used on Internal and External Balustrades and Shade Sail Installation
  • Available with 5mm, 6mm, 8mm, 10mm or 12mm Thread

Seizing, Binding or Galling

**All Threads will seize under high tension. It is a well known and accepted problem especially when using Stainless Steel or other alloys such as aluminium, etc. As pressure builds between the contacting and sliding surfaces protective oxides are broken, possibly wiped off, and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme, galling leads to seizing (the actual freezing together of the threads). If tightening is continued the fastener can be twisted off or it’s threads ripped out.

The frequency of threads seizing can be reduced by using antiseize compounds , but not eliminated. There are also other ways to minimize the occurrence of thread seizing, 

Keep the thread clean and away from dirt and grit, etc.

Tighten the Turnbuckle or Eyebolt slowly. Work them back and forth occasionally to feel if it is tight when loosening.

If the Turnbuckle or Eyebolt feels like it is heating up around the threaded part of the body it is because the metal threads are rubbing against each other under high tension. This can be an early sign that it may seize due to overloading. It may be that you need to go up a size to reduce the overloading. 

**Seizing is not a product fault but is the nature of Stainless Steel material**


All purchases are made with the Buyer agreeing to our Terms of Purchase when they place an order: http://www.theshadecentre.com.au/en/company-policies/terms-of-purchase

Additional information

Choose Size

5mm, 6mm, 8mm, 10mm, 12mm